17-86
SCPI Command Reference
RWLock
:SYSTem:RWLock
Description
Reset timestamp
RESet
:SYSTem:TIME:RESet
Description
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
This command is used to enable local lockout in a manner similar to the
GPIB LLO command (see
keys except OUTPUT OFF are locked out (not operational) when the
instrument is in remote. (See "REMote".) When disabled, the front
panel LOCAL key is operational in remote.
Removing the instrument from remote (:LOCal) restores front panel
keys operation.
This action command is used to reset the absolute timestamp to 0 sec-
onds. The timestamp also resets to 0 seconds every time the Model 2500
is turned on.
Models 2500 and 2502 User's Manual
Disable or enable front panel keys
Section
13). When enabled, the front panel
Reset timestamp