Control <Name; Select Timestamp Format; Format <Name - Keithley 2500 User Manual

Models 2500 and 2502 User's Manual
CONTrol <name>
:TRACe:FEED:CONTrol <name>
Parameters
Query
Description

Select timestamp format

FORMat <name>
:TRACe:TSTamp:FORMat <name>
Parameters
Query
Description
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
<name> = NEXT
NEVer
:CONTrol?
This command is used to select the buffer control. When NEXT is
selected, the asterisk (*) annunciator turns on to indicate that the buffer
is enabled. The storage process starts when Model 2500 is taken out of
idle to perform source-measure operations.
After the buffer stores the specified number of reading arrays (as set by
the :POINts command), the asterisk annuciator turns off to indicate that
storage is done.
With NEVer selected, storage into the buffer is disabled.
<name> = ABSolute
DELTa
:FORMat?
This command is used to select the timestamp format for buffer read-
ings. With ABSolute selected, each timestamp is referenced to the first
reading stored in the buffer. With DELTa selected, timestamps provide
the time between each buffer reading.
SCPI Command Reference
Start or stop buffer
Fills buffer and stops
Disables buffer storage
Query buffer control
Select timestamp format
Reference to first buffer reading
Time between buffer readings
Query timestamp format
17-89