Menus; Main Menu; Table 1-4 Main Menu - Keithley 2500 User Manual

1-20 Getting Started

Menus

The following paragraphs discuss the main menu, configuration menus, and rules to navi-
gate menus.

Main menu

Use the MENU key to access the Main Menu to select, configure, and/or perform various
instrument operations. These include default setup conditions, communications (GPIB or
RS-232), calibration, front panel tests, digital output states, auto zero, timestamp, and
numeric display format.
The Main Menu structure is summarized in
to check and/or change menu options.
Table 1-4
Main menu
1
Menu item
SAVESETUP
SAVE
RESTORE
POWERON
BENCH
GPIB
USER-SETUP-NUMBER
RESET
2
COMMUNICATION
GPIB
RS-232
BAUD
BITS
PARITY
TERMINATOR
FLOW CTRL
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Figure 1-4
Description
Configure setup conditions.
Save present Model 2500 setup to memory location.
Return the Model 2500 to setup saved in memory.
Select the power-on default setup.
Powers-on to BENCH defaults.
Powers-on to GPIB defaults.
Powers-on to user setup.
Returns unit to BENCH or GPIB defaults.
Select and configure remote interface.
Select GPIB (IEEE-488 Bus), set primary address,
GPIB protocol (Appendix G).
Select the RS-232 interface, set parameters.
Select baud rate.
Select number of data bits.
Select parity.
Select terminator.
Select flow control.
Model 2500 and 2502 User's Manual
Table 1-4. Use the "Rules to navigate menus"
shows the main menu tree.
Parameters
0 to 4
0 to 4
See Table 1-3.
See Table 1-3.
0 to 4
See Table 1-3.
0 to 30
(Default: 25)
57600, 38400,
19200, 9600,
4800, 2400,
1200, 600, 300
7 or 8
NONE, ODD,
EVEN
CR, CR+LF,
LF, or LF+CR
NONE or
XON/XOFF