Custom Sweep Commands; Table 9-4 Custom Sweep Commands - Keithley 2500 User Manual

9-14 Sweep Operation

Custom sweep commands

Table 9-4
Section
Table 9-4
Custom sweep commands
Command
:SOURce[1]:VOLTage:MODE LIST
:SOURce[1]:LIST:VOLTage < list>
:SOURce[1]:LIST:VOLTage:APPend <list>
:SOURce[1]:LIST:VOLTage:POINts?
:SOURce[1]:SWEep:RANGing <name>
:SOURce2:VOLTage:MODE LIST
:SOURce2:LIST:VOLTage < list>
:SOURce2:LIST:VOLTage:APPend <list>
:SOURce2:LIST:VOLTage:POINts?
:SOURce2:SWEep:RANGing <name>
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
summarizes remote commands used for custom sweep operation. See
17, "Configure list," for more details on these commands.
Select channel 1 voltage list (custom) sweep mode.
Define Ch. 1 V-source list (list = V1, V2,... Vn).
Add Ch. 1 V-source list value(s) (list =V1, V2,...Vn).
Query length of Ch. 1 V-source list.
Select Ch. 1 source ranging (name = BEST, AUTO, or
FIXed).
Select channel 2 voltage list (custom) sweep mode.
Define Ch. 2 V-source list (list = V1, V2,... Vn).
Add Ch. 2 V-source list value(s) (list =V1, V2,...Vn).
Query length of Ch. 2 V-source list.
Select Ch. 2 source ranging (name = BEST, AUTO, or
FIXed).
Models 2500 and 2502 User's Manual
Description