Keithley 2500 User Manual page 281

Models 2500 and 2502 User's Manual
Table 17-6 (continued)
SOURce command summary
Command
:SOURce2
:CLEar
[:IMMediate]
:AUTO
:MODE <name>
:MODE?
:DELay <n>
:AUTO <b>
:AUTO?
:DELay?
:GCONnect <b>
:GCONnect?
:VOLTage
:MODE <n>
:MODE?
:RANGe <n>
:AUTO <b>
:AUTO?
:RANGe?
[:LEVel]
[:IMMediate]
[:AMPLitude] <n>
[:AMPLitude]?
:TRIGgered
[:AMPLitude] <n>
[:AMPLitude]?
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Description
Path to control channel 2 source:
Path to clear source:
Turn selected source off.
Select source auto on/off mode source.
Specify auto on/off mode (ALWays or TCOunt).
Query auto on/off mode.
Specify settling time (in sec): 0 to 9999.999.
Enable or disable auto settling time.
Query state of auto settling time.
Query source settling time.
Enable/disable ground connect mode.
Query ground connect state.
Path to configure V-Source:
Select V-Source mode (FIXed, SWEep, or LIST).
Query V-Source mode.
Select fixed V-Source range; -100 to 100 (10 or 100).
Enable or disable autoranging.
Query state of autoranging.
Query V-Source range setting.
Set V-Source level (in volts):
Set specified voltage level immediately:
Specify voltage level; -100 to 100.
Query voltage level.
Set specified voltage level when triggered:
Specify voltage level; -100 to 100.
Query voltage level.
SCPI Command Reference
Default
parameter SCPI
ALWays
0.001
ON
OFF
FIXed
10
ON
0
0
17-15