Cdr Field Description - AudioCodes Mediant 800B User Manual

User's Manual

45.2.2 CDR Field Description

This section describes the CDR fields that are generated by the device.
45.2.2.1 CDR Fields for SBC Signaling
The CDR fields for SBC signaling are listed in the table below. The signaling CDRs are
published for each SBC leg.
CDR Field Name
SBCReportType
EPTyp
SIPMethod
SIPCallId
SessionId
Orig
SourceIp
SourcePort
DestIp
DestPort
TransportType
SrcURI
SrcURIBeforeMap
DstURI
DstURIBeforeMap
Durat
TrmSd
TrmReason
Version 6.6
Table ‎ 4 5-2: CDR Fields for SBC Signaling
Report Type:

CALL_START

CALL_CONNECT

CALL_END

DIALOG_START

DIALOG_END
Endpoint type (SBC)
SIP message type
Unique ID of call
Unique Session ID
Call originator:

LCL - for local

RMT - for remote
Source IP address
Source UDP port
Destination IP address
Destination UDP port
Transport type:

UDP

TCP

TLS
Source URI
Source URI before manipulation
Destination URI
Destination URI before manipulation
Call duration
Termination side (local or remote)
Termination reason
595
‎ 4 5. Reporting Information to External Party
Description
Mediant 800B GW & E-SBC