Viewing Analog Port Information - AudioCodes Mediant 800B User Manual

The status of the channels is depicted by color-coded icons, as described in the table
below:
Table 48-2: Description of Color-Coded Icons for Channel Status
Icon Color
Light blue
Green
Purple
Gray
Blue
Yellow
Dark Orange Maintenance B-channel has been intentionally taken out of service
Red
3. To view detailed information on a specific trunk's channel, click the required channel
icon; the Basic Channel Information page appears, displaying information under the
Basic tab (displayed in green):
To view additional channel information, click the required tab (SIP, RTP/RTCP, and
Voice Settings).
4. To view the settings of a specific trunk, click the required trunk icon, and then from the
shortcut menu, choose Port Settings; the Trunk Settings page opens, displaying the
trunk's settings. If needed, you can modify the settings (see ''Configuring Trunk
Settings'' on page 333).
48.2

Viewing Analog Port Information

The Home page allows you to view detailed information on selected FXS and FXO analog
ports such as RTP/RTCP and voice settings.
User's Manual
Label
Inactive Channel is configured, but currently has no calls
Active
Call in progress (RTP traffic) and no alarms
SS7 Channel is configured for SS7
Note: Currently, SS7 is not supported.
Non Voice Channel is not configured
ISDN Channel is configured as a D-channel
Signaling
CAS
-
Blocked
due to maintenance
Out Of
B-channel is out of service
Service
Figure 48-2: Basic Channel Information Page
660
Mediant 800B Gateway and E-SBC
Description
Document #: LTRT-10286