Modifying And Saving Parameters - AudioCodes Mediant 800B User Manual

User's Manual
6.1.6.3

Modifying and Saving Parameters

When you modify a parameter value on a page, the Edit
parameter. This indicates that the parameter has been modified, but has yet to be applied
(submitted). After you click Submit the
Figure 6-8: Edit Symbol after Modifying Parameter Value

To save configuration changes on a page to the device's volatile memory
(RAM):

On the toolbar, click the Submit

At the bottom of the page, click the Submit
When you click Submit, modifications to parameters with on-the-fly capabilities are
immediately applied to the device and take effect. Parameters displayed on the page with
the lightning
''Resetting the Device'' on page 565.
Note:
previous settings after a hardware or software reset, or if the device is powered down.
Thus, to ensure parameter changes (whether on-the-fly or not) are retained, save
('burn') them to the device's non-volatile memory, i.e., flash (see ''Saving
Configuration'' on page 568).
Version 6.8
icon take effect only after a device reset. For resetting the device, see
Parameters saved to the volatile memory (by clicking Submit), revert to their
icon appears to the right of the
icon disappears.
button.
button.
45 Mediant 800B Gateway and E-SBC
6. Web-Based Management