Show Tech-Support - Cisco ASR 9000 Series Command Reference Manual

Tech-Support Commands

show tech-support

To automatically run show commands that display system information, use the show tech-support command
in the EXEC and administration EXEC modes.
show tech-support [password] {terminal [page]| file send-to [background] [compressed| uncompressed]}
[location node-id]
Syntax Description
password
terminal
page
file
send-to
background
(Optional) Leaves passwords and other security information in the output. If not
used, passwords and other security-sensitive information in the output are replaced
with the label "<removed>".
Displays command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show tech-support
51