Reset Button; Supported Cisco Antennas And Antenna Accessories; Modem Support - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Product Overview

Reset Button

The Reset button resets the router configuration to the default factory configuration. To perform the reset,
use a standard size #1 paper clip with wire gauge 0.033 inch or smaller, and simultaneously press the Reset
button while applying power to the router.
Note The reset button does not cause a reset while the device is running.

Supported Cisco Antennas and Antenna Accessories

The IR1800 must have a pluggable module with antenna ports installed in order to connect to antennas. The
base unit does not have any wireless capabilities on its own.
The Chapter
the IR1800 with a wireless pluggable module. For detailed information about Cisco antennas for industrial
routers, see the
Note We strongly recommend against having antennas attached directly to the router. It is better to use cables
attached directly to the router.

Modem Support

Software download for the pluggable modules supported in the IR1800 is available at:
https://software.cisco.com/download/navigator.html?mdfid=286288566&flowid=76082
The following tables show the technology details for the modems.
Table 7: Modem Technology Supported
SKU ID Description
P-LTE-VZ U.S. (Verizon) Single Micro SIM
P-LTE-US North America (AT&T) Dual Micro
SIM
P-LTE-GB Europe Dual Micro SIM
Antenna Selection and Installation, on page 37
Cisco Industrial Routers and Industrial Wireless Access Points Antenna
Supported Technology
LTE CAT4: B4, B13
LTE CAT4: B2, B4, B5, B12
HSPA+,UMTS: B2, B4, B5
LTE CAT4: B3, B5, B8, B20, B28
HSPA+: B1, B5, B8
EDGE: 900/1800
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
lists the supported antennas and accessories for
Guide.
Reset Button
19