Mounting Bracket For Frame Size A5, B1,B2, C1 And C2 - Danfoss FC 300 Design Manual

10 Options and Accessories

10.13 Mounting Bracket for Frame Size A5, B1,B2, C1 and C2

Mounting Bracket for Frame Size A5, B1,B2, C1 and C2
Step 1
Position the lower bracket and mount it with screws. Do not tighten the
screws completely since this will make it difficult to mount the frequency
converter.
Frame size
IP
10
A [mm]
B [mm]
Ordering number
Step 3
Place the frequency converter in the lower bracket, lift the upper one.
When the frequency converter is in place, lower the upper bracket.
226
A5 B1
55/66 21/55/66
480 535
495 550
130B1080 130B1081
MG.33.BC.02 - VLT
Step 2
Measure distance A or B, and position the upper bracket, but do not
tighten it. See dimensions below
B2 B3
21/55/66 21/55/66
705 730
720 745
130B1082 130B1083
Step 4
Now tighten the screws. For extra security, drill and mount screws in all
holes.
® is a registered Danfoss trademark
FC 300 Design Guide
B4
21/55/66
820
835
130B1084