Remote Mounting Kit For Lcp - Danfoss FC 300 Design Manual

FC 300 Design Guide

10.11 Remote Mounting Kit for LCP

The LCP can be moved to the front of a cabinet by using the remote build
in kit. The enclosure is the IP65. The fastening screws must be tightened
with a torque of max. 1 Nm.
Ordering no. 130B1113
Illustration 10.7: LCP Kit with graphical LCP, fasteners, 3 m cable and
gasket.
LCP Kit without LCP is also available. Ordering number: 130B1117
For IP55 units the ordering number is 130B1129.
Technical data
Enclosure:
Max. cable length between and unit:
Communication std:
Ordering no. 130B1114
Illustration 10.8: LCP Kit with numerical LCP, fasternes and gasket.
MG.33.BC.02 - VLT ® is a registered Danfoss trademark
10 Options and Accessories
IP 65 front
3 m
RS 485
10
223