How To Read This Design Guide; Symbols - Danfoss FC 300 Design Manual

FC 300 Design Guide

1 How to Read this Design Guide

1.1.1 How to Read this Design Guide
This Design Guide will introduce all aspects of your AutomationDrive FC 300.
Available literature for AutomationDrive FC 300
- The VLT AutomationDrive Operating Instructions MG.33.AX.YY provide the neccessary information for getting the drive up and running.
- The VLT AutomationDrive High Power Operating Instructions MG.33.UX.YY
- The VLT AutomationDrive Design Guide MG.33.BX.YY entails all technical information about the drive and customer design and applications.
- The VLT AutomationDrive Programming Guide MG.33.MX.YY provides information on how to programme and includes complete parameter
descriptions.
- The VLT AutomationDrive Profibus Operating Instructions MG.33.CX.YY provide the information required for controlling, monitoring and pro-
gramming the drive via a Profibus fieldbus.
- The VLT AutomationDrive DeviceNet Operating Instructions MG.33.DX.YY provide the information required for controlling, monitoring and pro-
gramming the drive via a DeviceNet fieldbus.
X = Revision number
YY = Language code
Danfoss Drives technical literature is also available online at www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/Technical+Documenta-
tion.

1.1.2 Symbols

Symbols used in this guide.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
*
Indicates default setting
MG.33.BC.02 - VLT ® is a registered Danfoss trademark
1 How to Read this Design Guide
1
5