Danfoss FC 300 Design Manual page 92
0,25 kwt - 1,2 mwt
Hide thumbs
Also See for FC 300:
- Design manual (309 pages) ,
- Programming manual (234 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
4 AutomationDrive FC 300 Selection
Frame size D
60º AVM - Pulse Width Modulation, 380 - 500 V
4
Illustration 4.18: Derating of I
frame size D at 500 V, using 60º AVM in High torque mode
(160% over torque)
Illustration 4.20: Derating of I
frame size D at 500 V, using 60º AVM in Normal torque mode
(110% over torque)
60º AVM - Pulse Width Modulation, 525 - 690 V (except P315)
Illustration 4.22: Derating of I
frame size D at 690 V, using 60º AVM in High torque mode
(160% over torque). Note:
92
for different T
for
out
AMB, MAX
for different T
for
out
AMB, MAX
for different T
for
out
AMB, MAX
not
valid for P315.
MG.33.BC.02 - VLT
SFAVM - Stator Frequency Asyncron Vector Modulation, 380 -
500 V
Illustration 4.19: Derating of I
frame size D at 500 V, using SFAVM in High torque mode
(160% over torque)
Illustration 4.21: Derating of I
frame size D at 500 V, using SFAVM in Normal torque mode
(110% over torque)
SFAVM - Stator Frequency Asyncron Vector Modulation, 525 -
690 V (except P315)
Illustration 4.23: Derating of I
frame size D at 690 V, using SFAVM in High torque mode
(160% over torque). Note:
®
is a registered Danfoss trademark
FC 300 Design Guide
for different T
for
out
AMB, MAX
for different T
for
out
AMB, MAX
for different T
for
out
AMB, MAX
not
valid for P315.
Advertisement
Table of Contents
