Terminal Locations - Frame Size D - Danfoss FC 300 Design Manual
0,25 kwt - 1,2 mwt
Hide thumbs
Also See for FC 300:
- Design manual (309 pages) ,
- Programming manual (234 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
FC 300 Design Guide
7.2.3 Terminal Locations - Frame size D
Take the following position of the terminals into consideration when you design for cables access.
Illustration 7.13: Position of power connections, frame size D3 and D4
Illustration 7.14: Position of power connections with disconnect switch, frame size D1 and D2
Be aware that the power cables are heavy and hard to bend. Consider the optimum position of the frequency converter for ensuring easy installation of
the cables.
NB!
All D frames are available with standard input terminals or disconnect switch. All terminal dimensions can be found in table on next
page.
MG.33.BC.02 - VLT
®
is a registered Danfoss trademark
7 Mechanical Installation - Frame size D, E and
F
7
133
Advertisement
Table of Contents
Need help?
Do you have a question about the FC 300 and is the answer not in the manual?