Danfoss FC 300 Design Manual page 140

7 Mechanical Installation - Frame size D, E and
F
Terminal locations - Frame size F2 and F4
7
Illustration 7.23: Terminal locations - Inverter Cabinet - F2 and F4 (front, left and right side view). The gland plate is 42 mm below .0 level.
1) Earth ground bar
Terminal locations - Rectifier (F1, F2, F3 and F4)
Illustration 7.24: Terminal locations - Rectifier (Left side, front and right side view). The gland plate is 42 mm below .0 level.
1) Loadshare Terminal (-)
2) Earth ground bar
3) Loadshare Terminal (+)
140
MG.33.BC.02 - VLT ® is a registered Danfoss trademark
FC 300 Design Guide