Danfoss FC 300 Design Manual page 138

7 Mechanical Installation - Frame size D, E and
F
Illustration 7.20: IP00 enclosure power connections positions of disconnect switch
7
Note that the power cables are heavy and difficult to bend. Consider the optimum position of the frequency converter for ensuring easy installation of
the cables.
Each terminal allows use of up to 4 cables with cable lugs or use of standard box lug. Earth is connected to relevant termination point in the drive.
Illustration 7.21: Terminal in details
NB!
Power connections can be made to positions A or B
Frame
size
250/315 kW (400V) AND 355/450-500/630 KW
E2
315/355-400/450 kW (400V)
138
Unit type
IPOO/CHASSIS
381 (15.0)
(690 V)
383 (15.1)
MG.33.BC.02 - VLT
Dimension for disconnect terminal
A B C
245 (9.6) 334 (13.1)
244 (9.6) 334 (13.1)
® is a registered Danfoss trademark
FC 300 Design Guide
D E F
423 (16.7) 256 (10.1) N/A
424 (16.7) 109 (4.3) 149 (5.8)