List Of Interrupt Pointer Nos And Interrupt Factors - Mitsubishi Q00JCPU User Manual

10
DEVICE EXPLANATION

10.11.1 List of interrupt pointer Nos and interrupt factors

The following table lists the interrupt pointer Nos. and interrupt factors of each CPU
module.
(1) Basic model QCPU
Table10.22 Interrupt pointer No. and interrupt factor list (Basic model QCPU)
I No.
I0
I1
I2
I3
I4
I5
I6
I7
Interrupt module (QI60)
I8
I9
I10
I11
I12
I13
I14
I15
I16 to 27
I28
I29
Internal timer
I30
I31
I32 to 49
Intelligent function module/
*2*3
I50 to 127
Interrupt module (QI60)
* 1 : The time-out period of the internal timer is a default value.
It can be changed in 1ms units within the range 2ms to 1000ms in the PLC system setting of the
PLC parameter dialog box.
* 2 : To use the intelligent function module interrupt, the intelligent function module setting (interrupt
pointer setting) is required in the PLC system setting of the PLC parameter dialog box. (Refer to
Section 6.23 for the interrupt from the intelligent function module.)
* 3 : Among I50 to 127, I50 has the highest priority (priority 21) and I127 has the lowest priority (priority
98).
10.11.1 List of interrupt pointer Nos and interrupt factors
Interrupt factors
N/A
*1
N/A
Set which intelligent
function module/interrupt
module (QI60) is used with
parameters.
10.11 Interrupt pointer (I)
Priority
level
1st point 5
2nd point 6
3rd point 7
4th point 8
5th point 9
6th point 10
7th point 11
8th point 12
9th point 13
10th point 14
11th point 15
12th point 16
13th point 17
14th point 18
15th point 19
16th point 20
-- --
100ms 4
40ms 3
20ms 2
10ms 1
-- --
21 to 98
10
- 100
9
10
11
12