Precautions For Online Change - Mitsubishi Q00JCPU User Manual

Hide thumbs Also See for Q00JCPU:

Table of Contents

6.12.3 Precautions for online

The following shows precautions at the time of writing data during RUN.

(1) Online change performed during boot run

Standard ROM

6.12 Writing in Program during CPU Module RUN

6.12.3 Precautions for online change

Operation is performed as described in Table6.30 when online change is performed

Table6.30 Status of boot source program when writing data during RUN

Basic model QCPU

* 1: The boot source program can be changed by clicking "Yes"on the following message box. When

this operation is executed simultaneously with online change,the online change completion takes

If "No" is selected, boot source program will not be changed.

Turn OFF power supply of the CPU module after writing data during RUN. Or, write data of a

program memory to a memory card

* 2: Turn OFF power supply of the CPU module after writing data during RUN. Or, write data of a

program memory to a memory card

* 3: When boot source memory is Flash card or standard ROM, files of boot source are deleted and

replaced by files on program memory. Set files in the boot source memory to be transferred to the

program memory by the boot file setting of the parameter.

The Basic model QCPU cannot use a memory card.

The Universal model QCPU cannot boot data from the standard ROM to program memory.

Section 5.2.3)

changeNote29

Status of boot source program

High Performance

or the standard ROM

or the standard ROM

Universal model

Redundant CPU

before resetting the

before resetting the

Show Quick Links

Table of Contents