File Operation By Gx Developer And Handling Precautions; File Operation - Mitsubishi Q00JCPU User Manual

5
MEMORIES AND FILES HANDLED BY CPU MODULE

5.4 File Operation by GX Developer and Handling Precautions

5.4.1 File operation

The file operations shown in Table5.14 can be performed for the files stored in the
program memory, standard ROM or memory card
Basic
Developer. However, the executable file operations varies depending on the password
Note5.14
registration made by GX Developer, the system protect switch
module, and the RUN/STOP status of the CPU
Basic
Universal
UD
Note5.15
Note5.15
Table5.13 List of file operations that can be executed from GX Developer
File operation
Read from PLC Reads files from the target memory.
Writes files to the program memory or
SRAM card.
Write to PLC
Writes files to the standard ROM.
Verifies the target memory and GX
Verify with PLC
Developer files.
Batch-writes the files stored in the
Write the program program memory to the Flash card.
memory to ROM
Batch-writes the files stored in the
program memory to the standard ROM.
Batch-writes the specified files to the
Write to PLC (Flash Flash card by GX Developer.
ROM)
Batch-writes the specified files to the
standard ROM by GX Developer.
Delete PLC data Deletes the files stored on the memory.
Format PLC memory Formats the memory.
Arrange PLC Rearranges the discontinuous files on
memory the memory.
Online change in Writes the contents changed in the
ladder mode ladder mode to the program memory.
Note12
Basic
The Basic model QCPU does not support the use of a memory card.
Note5.14
Basic
Universal
The Basic model QCPU and Universal model QCPU do not support the system protect switch.
UD
Note5.15
Note5.15
5
5.4 File Operation by GX Developer and Handling Precautions
- 64
5.4.1 File operation
Operation details
Note5.14
by the online operation of GX
Note5.15
module.Note12
*1
Operability
(High Performance model
(Basic model QCPU)
A B C A
status of the CPU
*1
Operability
QCPU)
B C D