Mitsubishi Q00JCPU User Manual page 388

6
FUNCTIONS
High
Basic
Performance Process
Note6.31 Note6.31 Note6.31
Redundant
Note6.31
The trailing edge instructions
whose execution condition
set to OFF are not executed
by checking the check box.
Note32
High
Basic
Performance Process
Note6.31 Note6.31 Note6.31
Redundant
Note6.31
6
- 88 6.12 Writing in Program during CPU Module RUN
6.12.3 Precautions for online change
POINT
The event that the trailing edge instruction is executed even when the execution
condition (ON
can be avoided by setting the "Instruction operational settings for online change/
file online change" on the Options screen in GX Developer.
The default value depends on the CPU
• High Performance model QCPU, Process CPU, and Redundant CPU
The "Trailing edge instructions are not executed" checkbox is not
checked.
• Universal model QCPU
The "Trailing edge instructions are not executed" checkbox is checked.
Figure 6.58 Option menu screen in GX Developer
The Basic model QCPU does not support the selection of trailing edge instruction execution/non-
execution at online change.
When selecting the trailing edge instruction execution/non-execution at online change in the High
Performance model QCPU, Process CPU, and Redundant CPU, check the versions of CPU
module and GX Developer. (
OFF) is not established after the completion of online change
module.Note32
Appendix 4)
Note6.31