Mitsubishi Q00JCPU User Manual page 347

6
FUNCTIONS
6.11.1 Monitor condition
Basic
Note6.10
Set the monitor condition when executing monitor under the specified condition.
Universal
UD
(1) Monitor execution condition setting for ladder monitor
Note6.10
Note10
The Basic model QCPU cannot execute monitor with monitor condition setting.
Basic
Universal
When setting the monitor condition in the Universal model QCPU, check the versions of CPU
UD
module and GX Developer.(
Note6.10 Note6.10
settingNote10
Choose [Online] [Monitor]
Condition dialog box. The following shows an example in which to start a monitoring
operation at the leading edge of Y70.
Select when monitoring
by setting the contents
of the device
Select when monitoring
by setting Step No.
When condition is
enabled, monitor
is executed
(operation status
when condition is
enabled is
displayed).
[Monitor condition setup] to open the Monitor
Figure 6.28 Monitor condition screen
Appendix 4.5)
6.11 Monitor Function
6.11.1 Monitor condition setting
1
Note6.10
2
3
4
5
6
7
8
6
- 47