Remote Password - Mitsubishi Q00JCPU User Manual

9
PARAMETERS

9.4 Remote Password

This section explains the remote password-related parameter list and parameter details.
Set the remote password of the Ethernet module, serial communication module, modem
interface module and Built-in Ethernet port QCPU.
Item Parameter No.
Password settings ----
Model
----
name
Password
active mod-
ule settings
Start XY ----
Detail ----
User connection No. ----
System connection ----
Figure 9.31 Remote password setting screens
Table9.35 Remote password setting list
Description
Within 4 characters
Enter the remote password. (alphanumeric characters,
special symbols).
Select the module model name
QnUDE(H)CPU
that will be checked for the
QJ71E71
remote password set to the CU
QJ71C24/CMO
module.
<Basic model QCPU>
0000
Set the starting address of the <High Performance model
module checked for the remote QCPU, Process CPU,
password. Redundant CPU, Universal
model QCPU>
0000
Set the remote password details
in the QJ71E71.
Set the user connection No. Connection 1 to 16
Specify the remote password-
valid port.
• Auto open UDP port
• FTP transmission port (TCP/
Specify the remote password- • GX Developer transmission
valid port of the system
connection. • GX Developer transmission
• HTTP port
Setting range Default value
to 03E0
H H
to 0FE0
H H
--
IP)
port (TCP/IP)
port (UDP/IP), Dedicated
instruction, CC IE Control,
MNET/10(H) relay transmis-
sion port.
9.4 Remote Password
Reference
----
----
• QnUDE(H)CPU :
Section 7.7
----
• QJ71E71 :
Manuals of the
Ethernet module
• QJ71C24 :
Manuals of the
----
serial
communication
----
module
• QJ71CMO :
Manuals of the
modem interface
module
----
9
- 41
9
10
11
12