Mitsubishi Q00JCPU User Manual page 111

3
SEQUENCE PROGRAM CONFIGURATION AND
EXECUTION CONDITIONS
Basic Process Redundant
Note3.7 Note3.7
Note3.7
Universal
UD
Note3.7
High
Performance
Note3.8
Remark
Note7
Basic Process Redundant
The pointer dedicated to the high-speed interrupt function (I49) is not available for the Basic
Note3.7 Note3.7 Note3.7
model QCPU, Process CPU, Redundant CPU and Universal model QCPU.
Universal
UD
Note3.7
Note8
In the case of the High Performance model QCPU, the pointer dedicated to the high-speed
High
Performance
interrupt function (I49) is available for the QnHCPU only.
It is not available for the other CPU modules.
Note3.8
POINT
1. A pointer dedicated to the high-speed interrupt function (I49) is available as
an interrupt pointer.
Note7Note8
When using I49, do not execute the following:
• Other interrupt pointers (Interrupt pointers other than I49)
• Interrupt program
• Fixed scan execution type program
If any of the above is executed, the interrupt program of I49 cannot be
executed in the preset interrupt cycles.
2. Only one interrupt program can be created with one interrupt pointer number.
Refer to Section 10.11 for details of the interrupt factors and interrupt pointers.
Note3.7,Note3.8
EI
FEND
I0
I0 interrupt
program
IRET
I29
I29 interrupt
program
IRET
END
3.1 Sequence Program
3.1.3 Interrupt programs
1
2
3
4
5
6
7
8
3
- 13