Writing In Program During Cpu Module Run; Online Change In Ladder Mode - Mitsubishi Q00JCPU User Manual

6
FUNCTIONS

6.12 Writing in Program during CPU Module RUN

When the High Performance model QCPU is in the RUN status, you can write programs or
files in any of the steps shown in Table6.27.
CPU module
Basic model QCPU
High Performance model QCPU
Process CPU
Redundant CPU
Universal model QCPU
POINT

6.12.1 Online change in ladder mode

(1) Writing data in the circuit mode during RUN Status
Table6.27 Online change types
• Writing data in the circuit mode during RUN (Section 6.12.1)
• Writing a batch of files during RUN (Section 6.15.2)
• Writing data in the circuit mode during RUN (Section 6.12.1)
• File-write online change (Section 6.12.2)
• Writing a batch of files during RUN (Section 6.15.2)
Refer to the following manual for online change (order of write to control system
and standby system, whether tracking can be executed at execution of online
change, etc.) when the Redundant CPU is used.
QnPRHCPU User's Manual (Redundant System)
Writing data in the circuit mode during RUN is a function to write a program during the
CPU module RUN status.
The program can be changed without stopping the process in CPU module program
by performing writing data in the circuit mode during RUN status.
X0 X2
X1
X3 X4
X5
Change by GX Developer and write in
CPU module at the conversion.
Figure 6.51 Outline of online change in ladder mode
6.12 Writing in Program during CPU Module RUN
Online change type
Y30
SET M10
END
GX Developer
6.12.1 Online change in ladder mode
1
2
3
4
5
6
7
8
6
- 77