Mitsubishi Q00JCPU User Manual page 413

6
FUNCTIONS
(d) Writing trace data settings and trace condition settings
POINT
The created trace data settings and trace condition settings are written to the
target memory set in [Trace data (setting + result) storage] as sampling trace file.
Use the button on the Sampling trace screen to write the sampling
Write to PLC
trace file to the memory card (SRAM card).
When the sampling trace file is stored into the memory card (SRAM card),
multiple sampling trace files can be stored by changing the file name.
For the standard RAM, only one sampling trace file can be stored.
When multiple sampling trace files are used, use the memory card (SRAM card).
6.14 Sampling Trace Function
1
2
3
4
5
6
7
8
6
- 113