Mitsubishi Q00JCPU User Manual page 364

6
FUNCTIONS
(3) Operation procedure
Basic
Note6.18
Note20
Basic
Note6.18
6
- 64 6.11 Monitor Function
6.11.3 Forced ON/OFF for external I/O
The operation procedure is explained below.
• Register enforced ON/OFF for the specified device.
[Online] [Debug]
• It is possible to perform enforced ON or enforced OFF for a specified device
by selecting [Set forced ON] or [Set forced OFF] after the device has been
specified on the [Registration forced ON/OFF] setup screen.
Figure 6.39 Forced input output registration/cancellation screen
Table6.21 Enforced I/O registration/cancel screen items
No. Name of setup field
1) Device
Registration status
2)
displayed area
3) Update
4) Set forced ON/OFF
5) Cancel it
6) Clear all
The enforced ON registration and enforced OFF registration cannot be executed for Basic model
QCPU by selecting [Online]
operation can be executed for Basic model QCPU by conducting device test with GX Developer.
Note6.18 Note20
[Forced input output registration/cancellation]
1)
2)
3)
Enter the I/O number for which enforced ON/OFF is to be
set, or for which enforced ON/OFF is to be cancelled.
Displays the registration status of registered enforced input
and output.
Displays the registration status loaded from CPU module.
Performed enforced ON/OFF registration for specified
devices.
Cancels the enforced ON/OFF for registered devices.
Cancels all registered enforced I/O registrations.
[Debug] [Forced input output registration/cancellation]. This
5)
4)
6)
Function description