Mitsubishi Q00JCPU User Manual page 457

6
FUNCTIONS
(1) Installed status
Basic
Note6.64
Basic
Universal
UD
Note6.65 Note6.66
(2) Parameter status
Basic
Universal
UD
Note6.65 Note6.66
(3) Base
(4) Mode
High
Basic
Performance Universal
UD
Note6.67 Note6.67 Note6.67
Note66
Basic
When the Basic model QCPU is used, the control CPU of the module is not displayed.
Note6.64
Note67
Basic
When the Basic model QCPU is used, the power supply module mounting status.
Note6.65
Note68
Universal To monitor the Universal model QCPU mounting status, check the versions of CPU module and
UD
GX Developer.
Note6.66
Note69
High
Basic
Performance Universal Since online module change cannot be executed for the Basic model QCPU, High Performance
UD
model QCPU and Universal model CPU mode selection is not available.
Note6.67 Note6.67 Note6.67
Enables the controlling CPU, the model an07 d the number of modules mounted onto
the selected base unit to be confirmed.
"Not installed" will be displayed for slots in which modules have not been mounted.
When slots have been set as "Empty" at the "I/O assignment" tab screen in the "(PLC)
Parameter" dialog box, the module's model will not be displayed when if a module has
been mounted.Note66
When the redundant base module is used, the power supply module mounting status
Note6.65, Note6.66
is also displayed.
When the redundant CPU is used, redundant CPU status is also
Enables the I/O number, the module type and the number of modules mounted for
each of the slots on the selected base unit to be confirmed.
If the operation status shows 0 empty points and an allocation error is displayed, it
means that the PLC parameter's I/O allocation and the actual status are different.
Match the I/O assignment of the PLC parameter dialog box to the actual mounting
status.
When the Redundant base unit is used, the power supply module mounting status is
Note6.65, Note6.66
also displayed.
Enables the status of the modules mounted onto the base unit in use to be confirmed.
When there is at least one error module, the Module field turns to the status color of
that error module.
Note6.67 Note69
Used when online module change is executed.
Refer to the following manuals for online module change.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
Manual of the module compatible with online module change
6.20 CPU Module System Display by GX Developer
Note6.64
Note68
displayed.Note67
6
- 157
1
2
3
4
5
6
7
8