Chapter6 Functions; Function List - Mitsubishi Q00JCPU User Manual

6
FUNCTIONS

CHAPTER6 FUNCTIONS

This chapter explains the functions of the CPU module.

6.1 Function List

Table6.2 lists the functions of the CPU module.
The numbers in the "CPU module" column correspond to the CPU modules as indicated in
Table6.1.
Item
Constant scan
Latch function
Output status selection when the
status changed from STOP to RUN
Clock function
Remote RUN/STOP
Remote PAUSE
Remote RESET
Remote latch clear
Input response time selection
Table6.1 Number in the "CPU module" column and corresponding CPU module
No.
1) Basic model QCPU
2) High Performance model QCPU
3) Process CPU
4) Redundant CPU
5) Universal model QCPU
Table6.2 CPU module function list
Description
Executes the program in a set time interval
regardless of the program scan time.
Retains the device data even at power OFF or reset.
Selects the output (Y) status (outputting the same
status prior to STOP or clearing the status) when the
CPU module status is switched from STOP to RUN.
Reads the internal clock data of the CPU module to
use it for time management.
Stops or executes operations in the CPU module.
Stops operations in the CPU module while retaining
the status of output (Y).
Resets the CPU module when the CPU module is in
a STOP status.
Clears the latch data of the CPU module when the
CPU module is in a STOP status.
Selects the input response time for the Q series
compatible input modules, I/O combined modules,
high-speed input modules, and interrupt modules.
CPU module
CPU module
1) 2) 3) 4) 5)
: Supported, : Not supported
(Continued on next page)
6.1 Function List
1
2
3
4
Reference
Section 6.2
5
Section 6.3
Section 6.4
Section 6.5
Section
6.6.1
6
Section
6.6.2
Section
6.6.3
Section
6.6.4
7
Section 6.7
8
6
- 1