Interrupt Due To Error Occurrence - Mitsubishi Q00JCPU User Manual

6
FUNCTIONS
6.17.1 Interrupt due to error
Basic
Note6.56
The CPU module can execute the interrupt program of the interrupt pointer that is set as
the interrupt object when an error occurs.
Universal
UD
(1) Interrupt caused by the error that can be set to continue/stop in PLC
Note6.56
(2) Interrupt pointers and corresponding errors
High
Performance Process
Note6.57 Note6.57
Note58
Basic
Universal
UD
Note6.56 Note6.56
Note59
High
Performance Process
Note6.57 Note6.57
6
- 140 6.17 Self-diagnostics Function

6.17.1 Interrupt due to error occurrence

RAS setting
Only when the error set to "continue" at the "PLC RAS" tab screen in the "(PLC)
Parameter" dialog box occurs, the High Performance model QCPU executes the
interrupt program corresponding to the error. When the error set to "stop" there
occurs, the interrupt program (I32) for "Stop all errors" is executed.
Figure 6.85 indicates the interrupt pointers and corresponding errors.
Interrupt pointer Corresponding error message
Stop all errors
I32
I33 SINGLE PS.DOWN
I34
UNIT VERIFY ERR.
FUSE BREAK
SP.UNIT ERROR
MULTI
CPU
OPERATION ERROR
I35
SFCP OPE.ERROR
SFCP EXE.ERROR
EX.POWER OFF
I36 ICM.OPE.ERROR
FILE OPE.ERROR
I37
I38 PRG.TIME OVER
CHK instruction
I39
Annunciator detect
CAN'T SWITCH
I40
I41 STANDBY
* 1 : The I32 interrupt program is not executed upon the following serious errors.
•MAIN CPU DOWN
•END NOT EXECUTE
•RAM ERROR
•OPE CIRCUIT ERR.
* 2 : Applicable for the CPU module No.1 only when the multiple CPU system is configured by the High
Performance model QCPU or the Process CPU.
Figure 6.85 List of interrupt pointers corresponding to interrupts due to error occurrence
Since the Basic model QCPU and Universal model QCPU does support interrupt pointers for
error occurrence, it cannot perform interrupts caused by the error occurrence of the CPU module
itself.
The High Performance model QCPU and Process CPU do not support the interrupt pointers I33,
I40 and I41.
In addition, I33 applies to the CPU of which the serial No. of first 5 digits is "07032" or later.
occurrenceNote58
2
OFF
ERROR
Errors that occur when the system can continue the
drive mode, where or "continue" is selected from
"continues/stops".
Note6.57
Note59