Mitsubishi Q00JCPU User Manual page 335

6
FUNCTIONS
(c) Devices that are reset at execution of remote latch clear
(d) When redundant system is configured using Redundant CPU
Devices that are not latched are cleared when the remote latch clear is performed.
1) When both systems are not specified on remote operation screen
Remote latch clear is performed for only the system specified in the
connection target settings.
2) When both systems are specified on remote operation screen
Remote latch clear is performed for both the control system and standby
system.
However, remote operation is enabled for both systems (specified) only when
the Redundant CPU is in the backup mode.
6.6 Remote Operation
6.6.4 Remote latch clear
1
2
3
4
5
6
7
8
6
- 35