Mitsubishi Q00JCPU User Manual page 835

APPENDICES
Number Name Meaning
Status of
SD201 LED status
CPU-LED
LED off Bit pattern of LED
SD202
command that is turned off
TableApp.21 Special register
Explanation
• The following bit patterns store the status of the LEDs on the CPU
module:
• 0 is off, 1 is on, and 2 is flicker.
b15 to b12b11 to b8 b7
8) 7) 6) 5) 4)
1): RUN 5): BOOT
2): ERR. 6): Empty Mode bit pattern
3): USER 7): Empty 0: OFF 1: Green
4): BAT. 8): MODE 2: Orange
(The Basic model QCPU does not include 3) to 8).)
• The following bit patterns store the status of the LEDs on the CPU
module:
• 0 is off, 1 is on, and 2 is flicker.
to to
b15 b12b11 b8 b7
8) 7) 6) 5) 4)
1): RUN 5): BOOT
2): ERROR 6): Empty
3): USER 7): Empty
4): BAT. 8): MODE
• The following bit patterns store the status of the LEDs on the CPU
module:
• 0 is off, 1 is on, and 2 is flicker
b15 to b12b11 to b8 b7
8) 7) 6) 5) 4)
1): RUN 5): BOOT
2): ERROR 6): CARD A (memory card A)
3): USER 7): CARD B (memory card B)
4): BAT.ALARM 8): Empty
• Stores bit patterns of LEDs turned off
(Only USER and BOOT enabled)
• Turned off at 1, not turned off at 0
• Specify the LEDs to be turned off using this register, and turn SM202
from OFF to ON to turn off the specified LEDs.
USER and BOOT can be specified as the LEDs to be turned off.
• Specify the LEDs to be turned off in the following bit pattern.
(Turned off at 1, not be turned off at 0.)
b15 b8 b4
Fixed Fixed
to 0 to 0
Set by
(When Set)
to b4 b3 to b0
S (Status
3) 2) 1)
change)
to to
b4 b3 b0
S (Status
change)
3) 2) 1)
to b4 b3 to b0
S (Status
change)
3) 2) 1)
U
b0
U
Fixed
to 0
USER
LED
BOOT
LED
Appendix 2 Special Register List
Corres-
ponding
Corresponding
ACPU
CPU
D9
Q00J/Q00/Q01
Qn(H)
New
QnPH
QnPRH
New QnU
New
QnA
New
Qn(H)
QnPH
New
QnPRH
QnU
App
- 46
9
10
11
12