Mitsubishi Q00JCPU User Manual page 603

9
PARAMETERS
Redundant
(12) Multiple CPU setting
Note9.3
Item Parameter No.
No. of PLC 0E00
Host CPU number *1 E00C
Operating mode 0E01
Multiple CPU
synchronous startup E00B
setting *1
Note2
Redundant The Redundant CPU does not support the multiple CPU setting since a multiple CPU system
cannot be configured.
Note9.3
9.1.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU
Note9.3
Make setting to configure a multiple CPU system.
Table9.24 Multiple CPU setting list
Description
Set the number of CPU modules
used by the multiple CPU
H
system.
Specify the CPU number for
which the multiple CPU setting
H
parameters are set. (Specify the
host CPU number.)
Set the multiple CPU system
operation to be performed when
any of the CPU modules No. 2 to
No. 4 results in a stop error.
H
When the CPU No. 1 results in a
stop error, the multiple CPU
system stops. (Fixed)
Set whether to synchronize the
startup of CPU modules in the
H
multiple CPU system.
* 1: Can be set only when the Universal model QCPU (except the Q02UCPU) is used.
Note2
Figure 9.23 Multiple CPU setting
Setting range
1 to 4 modules 1 module
PLC No.1 to PLC No.4 No specification
Stop/Do not stop all CPUs at Stop all CPUs at
error of CPU No. n error of CPU No. n
All CPU modules
are set for
PLC No.1 to PLC No.4
synchronous
startup.
9.1 PLC Parameters
Default value Reference
QCPU User's Manual
(Multiple CPU
System)
(Continued on next page)
9
- 29
9
10
11
12