Mitsubishi Q00JCPU User Manual page 358

6
FUNCTIONS
(1) Operation when forced ON/OFF is registered
Basic
Note6.13
Note14
Basic
Note6.13
6
- 58 6.11 Monitor Function
6.11.3 Forced ON/OFF for external I/O
This function can perform three operations: forced ON ("Set forced ON"), forced OFF
("Set forced OFF"), and forced ON/OFF cancellation ("Cancel it").
Table6.18 shows the I/O operation when operations described above are performed.
Table6.18 I/O operation when Forced ON/OFF function is executed
Operation
Forced ON/OFF
cancellation
Forced ON
Forced OFF
* 1: In the backup mode, the enforced ON/OFF cannot be executed for the output (Y) of the standby
system.
The Basic model QCPU does not support the forced ON/OFF registration operation from the
Forced input output registration/cancellation screen (
The Basic model QCPU can forcibly turns ON/OFF external I/O only by executing a device test in
GX Developer.
Input (X) operation
Performs sequence program
operations with external input.
Performs sequence program
operations in the forced ON status.
Performs sequence program
operations in the forced OFF
status.
Note6.13
Note14
Output (Y) operation
Outputs the results of sequence
program operations externally.
Outputs "ON" externally regardless
of the results of sequence program
*1
operations.
Outputs "OFF" externally
regardless of the results of
sequence program operations.
(3) in this section).
*1
*1