Mitsubishi Q00JCPU User Manual page 552

7
COMMUNICATION
PORTS OF CPU MODULE
7
- 38 7.6 File Transfer Function (FTP)
USING
keyword-set
[Function]
Sets a file password registered in the file transfer target file into the Built-in
Ethernet port QCPU.
Or, displays/clears the password set for FTP settings in parameter.
* 1 : This command is used only when a file password is registered in the file transfer target file. When
accessing the specified file, the Built-in Ethernet port QCPU checks the file password.
[Specification format] quote keyword-set [File password]
File password:
Specify the file password registered in the Built-in Ethernet port QCPU file.
To clear the set file password, specify "****".
One of the following is displayed as the execution result upon normal
completion.
• When setting a file password: 200 Command successful
• When displaying a file password: 200 Keyword is "File password"
• When clearing a file password: 200 Command successful
[Specification example1] When setting the password (1234)
quote keyword-set 1234
[Specification example2]
When displaying the password currently set for FTP settings in parameter
quote keyword-set
[Specification example3]
When clearing the password currently set for FTP settings in parameter
quote keyword-set ****
[Note]
• One file password can be set for the FTP settings in Built-in Ethernet port
QCPU parameter.
When the file targeted for file transfer changes, re-set the file password of
the target file when a file password is also registered for the change target
file.
• When logging in to the Built-in Ethernet port QCPU, the file password is
initialized (cleared) to "****".
BUILT-IN ETHERNET
*1