Monitor Function; Monitor Condition Setting - Mitsubishi Q00JCPU User Manual

6
FUNCTIONS

6.11 Monitor Function

(1) Definition of Monitoring Function
Monitor function
Ladder monitor
Device/buffer memory batch
monitor
Device registration monitor
Device test
Ladder registration monitor

Monitor condition setting

Local device monitor/test
Forced ON/OFF for external I/O
Executional conditioned device
test
(2) Monitor request processing timing and displayed data
This is a function to read the program, device and intellignet function module status of
the CPU module by using GX Developer.
Table6.16 Monitor function list and applicable CPU
High
Basic model
Performance
QCPU
model QCPU
*1
*2
* 1 : The Basic model QCPU is irrelevant to the difference between global devices and local devices
( Section 10.14.1).
Therefore, it is not necessary to make the monitor setting of the local devices on GX Developer.
* 2 : The Basic model QCPU can only execute forced ON/OFF by device test.
* 3 : When using the Monitor condition setting in the Universal model QCPU, check the versions of
CPU module and GX Developer. (
* 4 : When using the Forced ON/OFF of external I/O in the Universal model QCPU, check the versions
of CPU module and GX Developer. (
* 5 : When using the Executional conditioned device test in the Universal model QCPU, check the
versions of CPU module and GX Developer. (
The CPU module performs the END processing to handle monitor requests from GX
Developer.
The results of CPU module END processing are displayed on the GX Developer side.
Applicability for CPU modules
Redundant
Process CPU
CPU
: Available
Appendix 4.5)
Appendix 4.5)
Appendix 4.5)
6.11 Monitor Function
Reference
Universal
model QCPU
GX Developer
Operating
Manual
*3
Section 6.11.1
Section 6.11.2
*4
Section 6.11.3
*5
Section 6.11.4
: Partly applicable : N/A
6
- 45
1
2
3
4
5
6
7
8