Mitsubishi Q00JCPU User Manual page 539

7
COMMUNICATION
PORTS OF CPU MODULE
Remark
(b) Operation on external device (FTP client) side
Start
Start up FTP client. (ftp<ret>)
Log-in to the QnUDE(H)CPU. (open IP address of the QnUDE(H)CPU<ret>)
Is the FTP
NO
targeted for the remote
password check?
YES
Unlock the remote password. (quote password-unlock Remote password<ret>)
Has the file
NO
transfer operation
completed?
YES
Is the FTP
NO
targeted for the remote
password check?
YES
(quote password-lock
Lock the remote password.
<ret>)
Disconnect the connection
(bye<ret>)
with the QnUDE(H)CPU.
End
USING
To access the CPU module via a router, set the "Subnet mask pattern" and the
"Default router IP address" settings as well. (
The procedure and required processing on the external device side when using
the FTP server function of Built-in Ethernet port QCPU are described below.
FTP operation commands used in each operation and their input methods are
also described. (<ret> indicates an input of the CR, Enter or Return key.)
File write
File read or file write?
File read
Notify that the file will
(binary<ret>)
not be converted.
(dir<ret> or Is<ret>)
Check the file list in the CPU.
NO
Does the read
target file exist?
YES
Is a file
NO
password set for
the target file?
YES
(quote keyword-set
Enter the file password.
File password<ret>)
(get File name<ret>)
Read the file.
Figure 7.26 FTP client side operation procedure
BUILT-IN ETHERNET
Section 7.2)
Notify that the file will
not be converted.
Check the file list in the CPU.
NO
Does the write
target file exist?
YES
Is it OK to overwrite?
YES
Is a file
NO
password set for
the target file?
YES
Enter the file password.
Delete the file with the same
name. Or change the file name.
Write the file.
7.6 File Transfer Function (FTP)
(binary<ret>)
(dir<ret> or Is<ret>)
NO
(quote keyword-set
File password<ret>)
(delete File name<ret>
rename Current file name
New file name<ret>)
(put File name<ret>)
7
- 25
1
2
3
4
5
6
7
8