Mitsubishi Q00JCPU User Manual page 306

6
FUNCTIONS
(3) Setting the constant scanning time
6
- 6 6.2 Constant scan
The constant scanning time is set at the "PLC RAS" tab screen in the "(PLC)
Parameter" dialog box.
The constant scanning time can be set within the following range.
• For Basic model QCPU
1 to 2000ms (set in 1ms unit)
• For High Performance model QCPU, Process CPU, Redundant CPU or Universal
model QCPU
When executing constant scanning, set the constant scanning time.
When not executing a constant scanning, leave the constant scanning time blank.
Figure 6.2 When constant scanning is set to 10ms
Set the constant
scanning time