Mitsubishi Q00JCPU User Manual page 356

6
FUNCTIONS
(2) Monitoring the Local Devices
(3) Precautions
6
- 56 6.11 Monitor Function
6.11.2 Local device monitor/test
Monitor local devices in the following steps:
Connect the personral computer to
the CPU module.
Display the circuit in the circuit mode.
Select [Online]
[Monitor mode].
Select [Local device monitor]
from the monitor window.
The local device of the
displayed program is
monitored.
Figure 6.36 Local device monitor procedure flowchart
(a) Local devices that can be monitored/tested by one GX Developer
It is only a single program that local devices can be monitored or tested by
operating from a single GX Developer. Local devices in multiple programs cannot
be monitored or tested by operating from a single GX Developer.
(b) Number of programs that can be monitored/tested
It is a maximum of 16 programs that local devices can be monitored or tested by
operating from multiple GX Developers connected to a RS-232 serial
communication module of the CPU module.
(c) Monitor of local devices in stand-by type program
When the local devices in the stand-by type program are monitored, the scan time
increases since the local device data are saved and restored.
( Section 10.14.1)
(d) Local device monitor of fixed scan execution type program
When the local devices in the fixed scan execution type program are monitored,
device data is not acquired and "0" is displayed.
[Monitor]
Switching to the monitor
mode
Setting of the local device
monitor