Table of Contents
Advertisement
Installing Core Switch 2/64 FRUs
8. Log into the new CP card as Admin, entering 0 to log into logical Switch 0
Figure 39: Sample output for logging in to switch 0 from a serial console
9. From the serial console for the new CP card, enter the hafailover
10. Verify that the configuration has successfully propagated to the new CP card
Note:
1000 lines. For more information about this command refer to the
Fabric OS Version 3.1.x/4.1.x Reference Guide.
146
(see
Figure
39).
Fabric OS (cp1)
cp1 Console Login: admin
Password:
Enter Switch Number to Login <0 or 1>: 0
SW0:admin>
command to fail the active CP card over to the new CP card.
by checking any configuration parameters for which you have specified
non-default values.
To do this, enter the configshow command followed by a text string (in
quotes) that relates to the parameter. For example:
configshow "fabric"
Entering the configshow command
This limits the command output to entries that contain that text string (see
Figure
40).
without
a filter prints out approximately
HP StorageWorks
Core Switch 2/64 V4.1 Installation Guide
Advertisement
Table of Contents
