Select Enable Screen Saver.
2.
Enter the number of minutes for Time Delay (from 1 to 99) to delay activation of password protection
3.
and the screen saver feature.
(Optional) Click Test to activate the screen saver test, which lasts 10 seconds and returns you to the
4.
Security dialog box.
Click OK to save settings.
5.
CAUTION: Monitor damage can result from the use of energy mode with monitors not
compliant with Energy Star®.
Logging in to the console switch
Press any key on the keyboard, or move the mouse. The Authorize dialog box appears.
1.
Enter the password, and then click OK.
2.
Removing the password protection
From the Main dialog box
1.
Choose one of the following options:
2.
In the Security dialog box, click the New field and press the Enter key.
o
Double-click the New field, leave the New field blank, and press the Enter key.
o
Choose one of the following options:
3.
Click the Repeat field and press the Enter key.
o
Double-click the Repeat field, leave the Repeat field blank, and press the Enter key.
o
Click OK if you want to eliminate the password.
4.
Resetting a console switch password
Press any key on the keyboard, or move the mouse. The Authorize dialog box appears.
1.
("Accessing the Main dialog
box" on page 22), click Setup>Security.
Local port operation 29