Accessing the Security dialog box
From the Main dialog box
Security dialog box appears.
Changing the password
From the Security dialog box
1.
or double-click the New field.
Enter the new password in the New field, and then press the Enter key.
2.
In the Repeat field, re-enter the password and press the Enter key.
3.
Click OK to change the password.
4.
IMPORTANT:
Permitted characters are case-sensitive and can consist of A–Z, 0–9, spaces, and hyphens.
Setting password protection
From the Security dialog box
1.
as described in the previous procedure
Select Enable Screen Saver.
2.
Enter the number of minutes for Time Delay (from 1 to 99) to delay activation of password protection
3.
and the screen saver feature.
(Optional) Click Test to activate the screen saver test, which lasts 10 seconds and returns you to the
4.
Security dialog box.
Click OK to save settings.
5.
CAUTION:
compliant with Energy Star®.
Logging in to the console switch
Press any key on the keyboard, or move the mouse. The Authorize dialog box appears.
1.
("Accessing the Main dialog
("Accessing the Security dialog
A valid password must be alphanumeric and be 5 to 15 characters in length.
("Accessing the Security dialog
("Changing the
Monitor damage can result from the use of energy mode with monitors not
box" on page 17), click Setup>Security. The
box" on page 29), click the New field
box" on page 29), set your password
password" on page 29).
Local port operation 29