Table of Contents
Advertisement
Port Side of Chassis
The Fibre Channel ports support link speeds of 1 and 2 Gbits/sec (inbound and
outbound), and automatically negotiate to the highest common speed of all
devices connected to the port. They are compatible with short wave-length and
long wave-length SFP (small form factor pluggable) transceivers, universal and
self-configuring, and are capable of individually becomining FL_Ports (fabric
loop ports), F_Ports (fabric ports), or E_Ports (expansion ports).
The Core Switch 2/64 consists of the following components:
Core Switch 2/64 V4.1 Installation Guide
For information about product availability, configuration, and connectivity,
consult your HP account representative.
Industry standard Management Information Base (MIB) support.
Automatic self-discovery, discovers and registers host server and storage
devices.
Web Tools is a GUI to that manages the SAN from a browser, such as Internet
Explorer or Netscape.
A 14U chassis, designed for installation in a standard 19-inch rack. Up to two
switches may be mounted in a standard 42U rack.
Two 16-port cards per chassis, with:
— 16 optical ports per card, compatible with Small Form Factor Pluggable
(SFP) media
Two Control Processor (CP) cards, each with:
— One modem serial port with a DB-9 connector (full RS-232)
— One terminal serial port with a DB-9 connector (RS-232 signal subset)
— One IEEE compliant RJ-45 connector for use with a 10/100 Mbps
Ethernet connection
— A real-time clock (RTC) with a 10-year battery and 56 bytes of NVRAM
Four power supplies with built-in fans
Two AC power inlet connectors with AC power switches
A World Wide Name (WWN) card and bezel
Three blower assemblies for forced-air cooling, that flows from the blower
side of the chassis to the port side of the chassis
Overview
21
Advertisement
Table of Contents
