Using The Switch Console To Configure The Console/Serial Link - HP ProCurve Switch 212M Management And Configuration Manual

Hewlett-packard procurve switch management and configuration guide
Table of Contents

Advertisement

Using the Switch Console To Configure the Console/
Serial Link
This screen enables you to:
Enable or disable inbound Telnet, and web browser interface access
(identified as Web Agent Enabled)
Modify console and serial link parameters
To Access Console/Serial Link Features
1.
From the Main Menu, select:
2. Switch Management Access Configuration (IP, SNMP, Console)...
4. Console/Serial Link Configuration
Figure 6-7. The Console/Serial Link Configuration Screen (Default Values)
2.
Press [E] (for Edit). The cursor moves to the Inbound Telnet Enabled field.
3.
Refer to the online help provided with this screen for further information
on configuration options for these features.
4.
When you have finished making changes to the above parameters, press
[Enter], then press [S] (for Save) and return to the Switch Management
Access Configuration menu.
Configuring the Switch
Console/Serial Link
6-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 224

Table of Contents