Table of Contents
Advertisement
Installing and Configuring the Core Switch 2/64
Note:
must follow the procedures in Appendix B, "Updating the Core Switch PID Format" to
change the parameter to 1. If the Core Switch PID format is not changed to 1 to match
the SAN Switch 2/32's value, then the switches residing in the SAN will fail to
communicate with one another.
For detailed recommendations and instructions on updating the Core Switch PID,
please refer to
page 184.
72
If the Core PID format is set to 0 in switches already running in the SAN, you
Appendix
A,
Extensive Information on the PID
Core Switch 2/64 V4.1 Installation Guide
Format, on
Advertisement
Table of Contents
