Table of Contents
Advertisement
1
2
3
4
5
Figure 23: CP card LEDs
There are two CP cards, an active CP card and a standby CP card. The active CP
card is the one actively controlling the HP StorageWorks Core Switch 2/64. If the
active CP card fails or is uninstalled, the standby CP card automatically becomes
the new active CP card. Failover occurs as soon as the active CP card is detected
to be faulty or uninstalled.
Each CP card provides the following ports:
Core Switch 2/64 V4.1 Installation Guide
Power LED
Status LED
RS-232 modem port
10101 terminal Serial port
Ethernet port
Modem serial port
The modem serial port has an RS-232 connector wired as a DTE device and is
designed to connect to a DCE device, such as a modem.
Operating the Core Switch 2/64
1
2
3
4
5
6
SHR-2518A
107
Advertisement
Table of Contents
