Running Routine Operations
Backing Up System Configuration Settings
Use these steps to upload a backup copy of the configuration settings to a host
computer.
Note:
backups and updates via FTP only.
1. Verify that the FTP service is running on the host workstation.
2. Log in to the switch as Admin.
3. Shut down the switch. At the command line, enter:
4. At the command line, enter:
5. Follow the onscreen prompts, for example:
164
The Core Switch 2/64 running Fabric OS V4.0 or later supports firmware
switchdisable
configupload
Server Name or IP Address [host]: 192.168.15.42
User Name: [None} user21
File Name [config.txt]: config-file.txt
Password: xxxxxxxx
The upload complete prompt displays, indicating a successful backup.
Core Switch 2/64 V4.1 Installation Guide