Upgrading The Console Switch Firmware Through The Hp Ip Console Viewer; Upgrading The Console Switch Firmware Through The Serial Management Connection - HP 409054-003 User Manual

The Upgrade dialog box appears. The status of the upgrade appears in the Programmed area.
Upgrading the console switch firmware through the HP IP
Console Viewer
To upgrade the firmware for through the HP IP Console Viewer, follow the instructions in the \TFTP\TFTP
Install Instructions.txt file on the CD included with this kit or the Softpaq TFTP directory.
Upgrading the console switch firmware through the serial
management connection
To upgrade the firmware for Microsoft® Windows® operating systems, follow the instructions in the
\TFTP\TFTP Install Instructions.txt file on the CD included with this kit or the Softpaq TFTP directory.
To upgrade the firmware for Linux operating systems:
Connect one end of a serial cable to an available COM port on the server or workstation.
1.
Connect the other end of the serial cable to the serial management connector
2.
components" on page 6) on the console switch.
Configure the terminal emulation software, such as HyperTerminal
3.
page 68) or Minicom
WARNING:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
•
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against
•
it. Pay particular attention to the plug, electrical outlet, and the point where the cord
extends from the storage system.
("Configuring Minicom" on page 69) for the server.
To reduce the risk of electric shock or damage to the equipment:
("Console switch
("Configuring HyperTerminal" on
Upgrading the firmware 80