Available Ports; Modem Connection; Services Controlled By The Cp Card - HP AA-RS2WC-TE Installation Manual

Available Ports

Each CP card provides the following ports:

Modem Connection

A separate modem can be connected to each modem serial port, and then
connected to the same or separate telephone lines for redundancy. For modem
installation instructions, see
Note:
modem is connected to an operating switch, the Core Switch 2/64 must be rebooted
in order to detect the modem.

Services Controlled by the CP Card

The active CP card controls the following services:
Core Switch 2/64 V4.1 Installation Guide
Modem serial port (labeled RS-232)—The modem serial port has an RS-232
connector wired as a DTE device, and is designed to connect to a DCE device,
such as a modem.
Terminal serial port (also known as a console port; labeled 10101)—The
terminal serial port has an RS-232 signal subset connector that can be used to
connect to a PC serial port or dumb terminal.
Ethernet port—The ethernet port has an RJ-45 connector, and is capable of
speeds of 10/100 Mbps.
The Core Switch 2/64 only detects modems during power on or reboot. If a
System initialization
High availability and switch drivers
Name server
SNMP
Fabric OS
Extended Fabrics
Fabric Watch
Remote Switch
Web Tools
Zoning
Secure Fabric OS
Performance Monitoring
Appendix D, Setting Up and Configuring
Operating the Core Switch 2/64
Modems.
93