Installing Core Switch 2/64 FRUs
Display Component Temperatures
Use sensorShow to display current temperature readings, fan status, and
Revolutions per Minute (RPM) as shown in the following example. This
command is per logical switch.
Display Power Supply Status
Use psShow to display power supply status as shown in the following example.
Display Blower Assembly Status
Use fanShow to list blower assembly statistics as shown in the following
example.
124
sw0_155:admin> sensorShow
sensor
1: (Temperature) is Ok, value is 36 C
sensor
2: (Temperature) is Ok, value is 35 C
sensor
3: (Temperature) is Absent
sensor
4: (Temperature) is Absent
sensor
5: (Temperature) is Ok, value is 21 C
sensor
6: (Temperature) is Ok, value is 21 C
sensor
7: (Fan
sensor
8: (Fan
sensor
9: (Fan
sensor 10: (power supply ) is Ok
sensor 11: (power supply ) is Faulty
sensor 12: (power supply ) is Ok
sensor 13: (power supply ) is Faulty
sw0_155:admin> psShow
power supply #1 is OK
power supply #2 is OK
power supply #3 is OK
power supply #4 is OK
sw0_155:admin> fanshow
Fan #1 is OK, speed is 2576 RPM
Fan #2 is OK, speed is 2481 RPM
Fan #3 is OK, speed is 2481 RPM _
) is Ok, speed is 2576 RPM
) is Ok, speed is 2481 RPM
) is Ok, speed is 2463 RPM
Core Switch 2/64 V4.1 Installation Guide